Management

Lengthen (or Shorten) AutoCAD Lines in a Flash!

9 Nov, 2015

If you need to lengthen lines a specific distance or to a total length, then you should be using the handy Lengthen command! Join Lynn Allen as she shows you how handy the Lengthen command can be when editing your objects.

Video Transcript

Hello there, this is Lynn Allen. Thank you for joining me for another AutoCAD tip, courtesy of the fabulous Cadalyst magazine. Hope you are having a great week so far. So far, so good for me, which makes me happy.

Today I'm going to share with you a tip that has to do with the Lengthen command, which is a command that I find a lot of people either don't know about it or they aren't using it or they forgot about it. It is actually a very handy command. Today we're going to focus on lengthening lines. If you are good, we'll come back and we'll look at arc later.

You can type in the Lengthen command or you can behave yourself and go to the Ribbon, and you can click on the Modify panel of the Home tab of the Ribbon. Right there is the Lengthen command. Very simple command. One of the nice things about the Lengthen command is it will tell you very quickly how long an object is. You can see right there, it told me the current length is 15.

Maybe that's not what I want. Maybe I want to tell it the total length. I wish the total length was 22. You can go ahead and click whichever object you want to be 22 units in length. Notice that it matters which end you go on. Which endpoint is going to determine which side is lengthened. Or you can make it shorter as well. So Lengthen will also make an object shorter, which is counterintuitive. So that was easy enough.

So let's go back into the Lengthen command, and we'll select this line again. Once again, it tell us now it's 22. It really, really did work. Let's try Delta. Delta is how much longer you want the object to be, in this case, it will always lengthen it. Let's say I want it to be 5 units longer. It's very visual. Once again, whichever end you select is the end that it will make longer, that it will lengthen. Pretty straight forward; very visual on the screen.

Let's go back in. This time we're going to do Percent. Let's say I want my object to be 25% of the lengthen that it used to be. You can make it longer. You can say 150%, or you can make it shorter. I'm gong to say 25. So as I move my cursor around, you will see the end that I select is the end is this case is going to be cut off. In this case it's going to be 25% of the total length. I'm only going to get the other side of that line. You can see the same deal. Kind of interesting. Once again you can make it longer by giving it a value higher than 100%. If you make a mistake, of course, you can Undo while you are in the command. Very, very simple. Very straightforward.

Okay, the last option -- we did Delta, we did Percent, we did Total -- is Dynamic. Now to be honest, Dynamic is not really my favorite. To me it's easier to do this with grips using the multi-function grips, but you know, whatever works for you. I'm going to go ahead. You'll see I'm going to select this object, and it tells me now to -- it's only going to lengthen it in the same direction. You should know that. Even if I turn my Ortho off, it's not going to make any difference. It's going to lengthen the line, keeping the angle the same.

So as I move my cursor, you can see it's telling me the distance it's lengthening it, or shortening it, depending on where you go. You can type in a value if you want. I'm going to go ahead and just select. That one's not so exciting. Nevertheless, you will see that back in the Lengthen command, some pretty cool options in there to help you very quickly lengthen or sometimes shorten an object, depending on what you are doing.

I hope that you found that tip to be valuable. We'll take a look at arcs later on. I'm going to see you back here in two more weeks. Take care! Behave.


Add comment

Note: Comments are moderated and will appear live after approval by the site moderator.

Cadalyst Video Gallery
Working with Navisworks Files in AutoCAD Video
Working with Navisworks Files in AutoCAD   23 Oct, 2017

Have you ever been asked to coordinate your AutoCAD drawings with a Navisworks file? Join Lynn Allen as she shows you how easy it is to bring a Navisworks file into AutoCAD and draw objects within the file (and avoid clashes!).More>>

AutoCAD Video Tips: Dock Palettes for Speedy Access Video
Dock AutoCAD Palettes for Speedy Access   9 Oct, 2017

Join Lynn Allen as she addresses the number-one question she gets about her videos. She’ll also show you how docking palettes for easy access can save you lots of time! More>>

AutoCAD Video Tips: Snap to Hatch Patterns and Extension Lines Video
Snap to AutoCAD Hatch Patterns and Extension Lines   25 Sep, 2017

If you’ve ever grabbed the endpoint of an extension line rather than the intended object, or wished you could grab the individual objects in a crosshatch pattern, then this tip is for you! Join Lynn Allen as she shows you how to manage the object snap behavior as it relates to hatch patterns and...More>>

AutoCAD Video Tips: The Undo Command Master Class Video
AutoCAD Video Tips: The Undo Command Master Class   11 Sep, 2017

So you think you know all there is to know about Undo? Not so fast! Join Lynn Allen as she shows you how to have ultimate control over the Undo behavior in AutoCAD, so you can customize it for maximum productivity.More>>

Master the Undo Command Video
AutoCAD Video Tips: Master the Undo Command   28 Aug, 2017

So you think you can Undo? There’s so much more to it than just using the simple U command. Join Lynn Allen as she shows you a few of the many options in AutoCAD’s Undo command — and puts you on the road to instant productivity!More>>

Copy Multiple Objects out of Xrefs Video
AutoCAD Video Tips: Copy Multiple Objects out of Xrefs   14 Aug, 2017

If you want to copy a large group of objects out of an external reference (xref) and don’t want to use the painful NCopy command that forces you to pick them one at a time, then you’ll love this tip! More>>

Constrain Cable Points in Autodesk Inventor Cable and Harness Video
Constrain Cable Points in Autodesk Inventor Cable and Harness   31 Jul, 2017

This IMAGINiT Tricks tutorial shows how to control complex routing and create component work points as paths to define and constrain cable points. More>>

Close the Gaps in Badly Drawn AutoCAD Drawings Video
Close the Gaps in Badly Drawn AutoCAD Drawings   24 Jul, 2017

Have you ever tried to join lines or plines together that were not contiguous? It can be done, but you have to know the top-secret recipe for doing so! Join Lynn Allen as she shows you how to get rid of the gaps and end up with seamless polylines.More>>

AutoCAD Tips!

Lynn Allen

In her easy-to-follow, friendly style, long-time Cadalyst contributing editor and Autodesk Technical Evangelist Lynn Allen guides you through a new feature or time-saving trick in every episode of her popular AutoCAD video tips. Subscribe to the free Cadalyst Video Picks newsletter and we'll notify you every time a new video tip is published. All exclusively from Cadalyst!

Follow Lynn on TwitterFollow Lynn on Twitter





Download Cadalyst Magazine Special Edition