AEC Tech News (#331)18 Jul, 2013 By: Cadalyst Staff
Mouse Alternative Promises a More Comfortable Click
Contour Design launches RollerMouse Re:d, an ergonomic input device that's gentle on the joints and precise enough for CAD use.
By Cadalyst Staff
What's black and white and "Re:d" all over? It's the latest version of the RollerMouse from Contour Design, a developer of ergonomic computer input devices. Optimized for CAD use, the new RollerMouse Re:d delivers precise cursor control that increases user productivity while decreasing stress on the neck, shoulders, elbows, and wrists, the company reports.
Contour Design's new RollerMouse Re:d incorporates tracking technology and dual laser sensors that allow for very precise cursor control without the joint strain associated with traditional mouse use.
RollerMouse Re:d is the latest in a line of products designed to eliminate the reaching and gripping common to traditional mouse use, which can lead to repetitive-stress injuries. It sports a new housing of seamless aluminum that provides durability as well as a sleek appearance. Its roller bar is textured and thicker than previous designs, offers a low-friction glide, and incorporates new 7SENSES tracking technology for cursor precision and control that surpasses that of all competing products, according to the company.
"With the new tracking technology, Contour Design has redefined precision, so it's not really relevant to discuss DPI anymore," says CEO Steven Wang. "Dual laser sensors track the motion inside the roller bar and give you the most accurate pointing device you can get." Located inside the bar, the sensors are protected from dust and dirt. 7SENSES constantly adjusts speed and acceleration to ensure the rollerbar is as central as possible, while intuitively adapting to the user's pace to decrease micromovements and increase efficiency.
It's that improved precision that makes Re:d the first RollerMouse suited to CAD work, and the larger surface gives users more control when pointing, rolling, or clicking. Re:d also offers new features that minimize the transition time from standard mousing to "RollerMousing," the company states. Users also can adjust click force and click volume to suit their preferences. Read more »
Bentley Systems Consolidates Utility Design and Management in New Application
With Bentley Utilities Designer, customers can access network design, cost estimation, and GIS capabilities in one software solution.
By Cyrena Respini-Irwin
At the end of June, Bentley Systems released Bentley Utilities Designer, a multifaceted application for electric, gas, water, and wastewater utility networks. Combining intelligent CAD-based design, geographic information system (GIS), and cost estimation tools in one package, the new release is designed to simplify software portfolios and streamline workflows. "It provides comprehensive network design and management for utility owner–operators," said Victor Alvarez, Bentley's senior product marketing manager.
Expanding on a Familiar Foundation
The developers of Bentley Utilities Designer sought to improve workflows by consolidating existing tools, including MicroStation (an information modeling environment for infrastructure projects) and Bentley Map (a 3D GIS). "[They] looked at previous utility design offerings, rolled [multiple] products into one application, and extended the capabilities further," said Alvarez. The new product is not a replacement for MicroStation, he noted, but rather a utility-specific design product that packages intelligent CAD-based design and GIS into a single application, with a single license.
In addition, this release includes wastewater network design capabilities for the first time. Previously, the Bentley Systems portfolio offered wastewater network analysis, but the ability to design the layout and connections for all components of the network is new, said Alvarez. Read more »
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cyrena Respini-Irwin is Cadalyst's senior editor.
Mark Your Calendar: AEC Events
BIM Camp — Denver
July 25, 2013
At BIM Camp, Nemetschek Vectorworks representatives will explain that adopting a building information modeling (BIM) workflow doesn't have to be time consuming or expensive. Read more »
Bluebeam EXtreme Conference
August 2, 2013
Los Angeles, California
Attendees of this conference can learn best practices from industry experts, connect with fellow Revu software enthusiasts, and discover how to master new techniques from Bluebeam's leading engineers. Read more »
Fall BIM Forum: Prefabrication and Modularization
October 8–9, 2013
Participants in the Fall 2013 BIMForum will be examining the issues, advantages, and especially the challenges, of using building information modeling (BIM) for prefabricating building systems and constructing modular building sections. Read more »
For a complete list of CAD meetings, conferences, training sessions, and more, check out our calendar of events on Cadalyst.com. Are you hosting an event that you would like to include in our calendar? Submit details at least two weeks in advance to email@example.com.
What’s New at Cadalyst.com
Window Maker Speeds File Retrieval Time with AutoCAD Search Tool
With a quarter-million CAD drawings on file, Sierra Pacific Industries depends on DrawingSearcher to fulfill customer requests in a timely fashion. Read more »
Femap Tips and Tricks: Restore Associativity between Imported CAD and FEA Models
Bringing in data from outside platforms may break associativity between models. Here's a method to fix the problem. Read more »
Vacation Planning for the CAD Manager
Follow these simple tips to maximize your summer fun — and minimize the chance of work-related interruptions.. Read more »
Seven Pitfalls to Avoid as You Transition to 3D Modeling
You've heard plenty about what to do when moving from 2D CAD to 3D and building information modeling. Now it's time to learn what not to do. Read more »
Three Ways to Change Your Current AutoCAD Layer
Changing layers is a fact of life in AutoCAD — are you doing it the fastest possible way? Join Autodesk Evangelist Lynn Allen as she shows you three different ways to change your current layer. Watch the video »
In her easy-to-follow, friendly style, long-time Cadalyst contributing editor and Autodesk Technical Evangelist Lynn Allen guides you through a new feature or time-saving trick in every episode of her popular AutoCAD video tips. Subscribe to the free Cadalyst Video Picks newsletter and we'll notify you every time a new video tip is published. All exclusively from Cadalyst!